OIDs for the sensors on the Bluecoat ProxySG
Posted by Admin on 14th October 2009
If you're new here, you may want to subscribe to my RSS feed. Thanks for visiting!
Here is a list of sensors and the SNMPÂ OID for that sensor:
| Sensor Name | SNMP OID |
| Motherboard temperature | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.1 |
| Power supply cage temperature | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.2 |
| CPU 1 temperature | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.3 |
| Fan 1 speed | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.4 |
| Fan 2 speed | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.5 |
| Fan 3 speed | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.6 |
| Power supply 1 fan 1 status | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.7 |
| Power supply 1 fan 2 status | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.8 |
| Power supply 2 fan 1 status | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.9 |
| Power supply 2 fan 2 status | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.10 |
| CPU 1 fan speed | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.11 |
| +3.3V bus voltage | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.12 |
| +5V bus voltage | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.13 |
| +12V bus voltage | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.14 |
| CPU 1 core voltage | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.15 |
| CPU 1 +2.6V bus voltage | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.16 |
| Power supply 1 status | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.17 |
| Power supply 2 status | 1.3.6.1.4.1.3417.2.1.1.1.1.1.5.18 |
(Note: The above sensors come from an 8100-B, but they should be the same for most platforms)
The easiest way to verify any of the OIDs above is to use the SNMP get command and then verify the sensor reading in the sysinfo.
Posted in Monitoring | No Comments »