I only tried this for a Belkin G+MIMO but it should be ok for most router types.
Before you carry on:
Sep 212008
Search Results : routers » Page 2
Sep 042008
Cisco Routers and Switches with L3 routing functions are seen to have problems with High CPU usage when SNMP is enabled. This can range anything from 15% to 40%. According to Cisco, these are low priority processes and other priority processes requiring CPU cycles are given priority over these processes and this level of CPU utilisation can be is normal. However, it is always better to be safe than sorry and get the CPU utilisation caused by SNMP to bare minimum so as to ensure the Routers function smoothly.
Incoming search terms:
- snmp engine high cpu cisco (26)
- snmp engine high cpu (21)
- snmp-server view cutdown (16)
- cisco snmp engine high cpu (15)
- cisco 3750 snmp engine high cpu (9)
- cisco 3750 high cpu snmp engine (7)
- cisco SNMP ENGINE (4)
- cisco snmp-server view cutdown (4)
- snmp high cpu utilization cisco (3)
- cisco router cpu utilization hi hitting 94% how to resove it (2)
Jul 232008
This tutorial will explain Howto setup DHCP Server and Dynamic DNS with BIND in Debian.
Preparing you system
First you need to install DHCP,BIND servers using the following command
Incoming search terms:
- bind dynamic dns (230)
- bind ddns (173)
- bind dhcp (132)
- bind9 dynamic dns (122)
- dynamic dns bind (121)
- ddns bind (86)
- debian dynamic dns (84)
- debian dhcp server 5 min (74)
- dhcp bind (72)
- dhcp dns (67)
Feb 092008
upgrading IOS on Cisco routers and switches is hightly recommendable because of the following reasons
Patch critical vulnerabilities: Just like any other network device or application, Cisco routers and switches are also prone to security holes. And because routers and switches are critical to network infrastructure, you should plug these security holes as soon as possible.
Incoming search terms:
- cisco ios upgrade (130)
- upgrade cisco ios (93)
- cisco ios update (86)
- update cisco ios (67)
- ios update cisco bin (49)
- how to upgrade cisco ios (44)
- cisco 2960 ios upgrade (35)
- cisco upgrade ios (35)
- cisco update ios (35)
- cisco flash (34)
Dec 182007
There are five passwords used to secure your Cisco routers: console, auxiliary, telnet (VTY),enable password, and enable secret. Just as you learned earlier in the chapter, the first two passwords are used to set your enable password that’s used to secure privileged mode. This will prompt a user for a password when the enable command is used. The other three are used to configure a password when user mode is accessed either through the console port, through the auxiliary port, or via Telnet.
Incoming search terms:
Nov 222007
This ‘How to' is written to show the step by step password recovery of the Cisco Routers. It is assumed that you have a prior knowledge of what a router is and its basic function. It is also assumed the you are having some experience of configuring the router.
Incoming search terms:
- cisco router password recovery (414)
- cisco router password (231)
- cisco password recovery (226)
- password recovery cisco (126)
- how to break cisco router password (92)
- forgot cisco router password (64)
- router password break command (64)
- password recovery cisco router (63)
- how to recover cisco router password (58)
- how to reset cisco router password (43)